Page 2 of 9

Dropping In And Lifting Out…

I’ve got a newsletter now! Subscribe here. I’ll give a free copy of my blending tip pdf.

DROPPING IN paint is introducing another color to a still-wet wash.  The second color will soften into the first color, subtly blending on its own.  This painting technique can create the illusion of shape in a curved object (for example, a tree trunk, flagpole, fencepost, chair leg, or arm) and can also help suggest depth in a painting.

To drop in, put down some color on paper, not too wet.  Then mix a second color, a little darker than the first.  Drop the second color into the wet first wash along one side with a light touch.  Put a little color in at first, adding more (while everything is still wet) only if necessary.

Dropping In.jpg

Many painters almost unconsciously LIFT OUT paint to adjust tones and colors while they are painting.  You can deliberately draw out color from “too dark” areas, when the paint is still wet, by using a slightly damp brush (as you would a sponge) to lift off or soak up pigment.

Be careful, however, if you paint with a staining color, because lifting out paint will be much more difficult (if not impossible).  If you want to lift out paint from a dark area, make sure you use non-staining colors.  Try to lift out paint soon after the paint has dried, because then you won’t need to put in as much effort as you would when the paint has set and dried for several days.

Lifting Out.jpg

If you want to lift color from a large area, wet the area, allow the water to settle in to the paper and moisten the pigment, then work the brush over it (tickle the area) to start moving the pigment.  As the pigment softens and becomes moistened, lift out with a slightly damp (not dripping wet) brush.  The brush needs to be drier than the paint, or it cannot absorb and lift out the wet pigment.  If your brush becomes wet and full of paint while you are lifting, you will need to rinse and slightly dry the brush again (and perhaps repeat the process several times).  Tissues and paper towels can also blot up unwanted color.  Use a clean paper towel, for instance, and blot straight up; do not rub.

If you wish to lift paint from a smaller area, moisten just the area you want to lighten.  Only moistened paint will lift.  An erasing shield (or a piece of paper or cardboard or even #810 clear Scotch tape) and a small stiff brush will make it easier to lift along a straight, sharp line or small specific area.

I’ve got a newsletter now! Subscribe here. I’ll give a free copy of my blending tip pdf.

Drama In the Skies!

In a landscape painting, the sky affects the tone, mood, and atmosphere of the whole painting.  As painters, we strive for an interesting, perhaps a dramatic sky whether or not that is what we see in front of us.  Clear blue skies can appear bland and less than inspiring.  In a painting the artist hopes to design a sky that helps create the most effective mood for the subject.  Ask yourself, “What does this subject need to make it work well?”

If a landscape or seascape is busy, with lots of details or information, a simple sky treatment might be a good choice. 

Rusty truck painting.jpg

On the other hand, a moody, vibrant, or striking sky would complement a composition with a low horizon line, as in a stark, brooding moor or a bold sunset. 

Sky after Mucillo painting.jpg

As another example, a roof in the rain could take on a gleam of silver as the sky reflects off it.

Rainy sky painting.jpg

It is essential to decide what sort of sky is involved in a landscape painting BEFORE starting the painting.  This statement is true even if a sky will not actually be seen in your picture, because the appearance of the light depends entirely on the sky.  A landscape can be creatively transformed by altering the light or weather conditions in a painting.  Light and shadow, color and mood should be consistent throughout your composition, so skies must be part of your initial planning.

Hikers painting.jpg

Wilfred Ball, in Weather in Watercolour (1986), describes the “creative transformation” of planning a composition by altering sky and weather details.  “Buildings, walls, gates, fields and mountains tend to be relatively formal features of the landscape, but the effect on them of such variables as the light, seasons and weather is capricious and magical” (p. 9).  And changes in the sky and weather are “merely an extension of the creative process that goes on whenever we paint.  Almost without thinking we strengthen this, weaken that, miss out a tree here, heighten the colour of an autumn tree to focus attention on it.  These devices are all ways of recomposing the subject to increase its impact.  Indeed it is this kind of alteration, that we make to the subject matter as we saw it, that is the creative process in what would otherwise be a straightforward copying procedure.  Using the weather creatively is one of the most effective of all the transformation devices a painter can use” (p. 11).

Thus, you should not be afraid to use a bit of imagination when creating a sky.  Think about the colors you will use in your painting, and have them mixed and ready to go.  Mix up large, juicy puddles of the sky colors you will use.  Mix lots more than you think you will need to insure that you won’t run out or have to skimp while painting!

Have your plan thought out before wetting your paper.  Skies are often painted wet-in-wet, though other techniques (wet on dry, for instance) can also be used.  To begin, wet the sky area with clean water.  As soon as the shine goes from the paper (and when it appears to have a more matte finish), DROP in your colors by floating the pigment across the paper.  Try NOT TO PUSH the colors around, instead letting the colors mix together on their own.  Do not overwork or touch the paint while it is drying.  During drying time, the sky continues to develop ON ITS OWN with a subtle blending of colors.  Timing is all-important.  Don’t paint back into your sky; be assured, and paint with confidence.

To increase the feeling of distance in your sky, lighten the sky toward the horizon.  Colors can be warmer and darker higher in the sky.  Don’t view the sky as separate from the rest of your painting.  Remember: it affects your entire landscape.  You can achieve the needed harmony by echoing the sky colors in the rest of the picture.  For example, include warm sunlight on the side of a building or reflections of a sunset on water or snow.

VT farmhouse painting.jpg

Rainy field painting cropped.jpg

What colors should you use?  Sometimes you may want to add yellow highlights to a blue sky.  Have you ever laid down a sky with blue and yellow and had it start to turn green where the two colors met?  The effect has something to do with color bias and color mixing.  Certain blues have a red bias (they contain some red pigment), while others lean toward green, and whichever blue you use will react with other colors according to its bias.  If you are unsure how your colors will interact, try several combinations of blue and yellow on test paper.  Alternatively, lay down your pale yellow wash, and let it dry before adding blue.  This way, you will have less chance of creating green, even though you will also lose some of the soft mingling of color that occurs with the wet-in-wet technique.

To avoid surprising or unpleasant color mixes when combining colors in the sky, try arranging your color sequence like a rainbow.  In a naturally occurring rainbow, the colors appear in a sequence similar to (but not precisely the same as) the following; so from the top of the sky to bottom (horizon), you could use:

*Ultramarine (which has a red bias)

*Cobalt (no real bias)

*Cerulean (yellow-green bias)

*Raw Sienna (red-orange bias)

*Permanent Alizarin Crimson (or Perylene Maroon or Permanent Rose) mixed with  Ultramarine Blue. (Be sure not to use too much red.)

Put your colors in bands in this order, just overlapping the edges so the colors soften.  Keep in mind that you needn’t use every one of the above colors in your sky, but use at least two.  Your choices of colors will affect how each color blends with its neighbor when they touch.  Test your colors and technique on a test sheet before applying paint to your picture.  Make sure you understand the affect of your color choices so you can avoid unpleasant surprises.

A sky affects the tone and mood of the whole painting.  Plan ahead for a dramatic, interesting sky that integrates well with the rest of your picture.  The sky will suggest proper placement for shadows and even some of the colors you should use throughout your painting.  For example, strong Mediterranean sunlight will create harder lines and sharper contrast than a misty morning in the Scottish Highlands.  Don’t be afraid to use your imagination when creating a sky.  Don’t paint back into your sky, don’t fiddle, and don’t be impatient.  Instead, try to apply your colors confidently, with a large brush, and let the colors mix together on their own.

Great wass island painting.jpg

Watercolor’s Best Brands!

When you begin to paint with watercolors, you might think you need to decide on just one brand of watercolor paint.  You don’t, however, need to limit yourself to one manufacturer only.  Most brands combine and work well with each other.

No one brand of paint manufacturer provides the perfect collection of paint colors.  But a number of reliable, reputable companies are doing a very good job.  I will share my favorites below.

Keep in mind that pigment name and number are more important than choosing a brand of paint or purchasing simply by color names.  The actual pigment used indicates the character of the paint color and determines how long it will last.  Certain pigments used in formulating paints are fugitive (colors will fade over time and with exposure to light) but are still used even by more reputable companies. A color pigment, which has its own specific identifying name and number, is the actual substance that produces the paint color and, along with other ingredients, the characteristics of the paint. The color name on the tube can vary by company.  For instance, Pigment Blue #15 (PB15) is Winsor Newton Winsor Blue AND Phthalo Blue from many other companies.  On the other hand, Sap Green characteristics and pigments vary wildly by manufacturer – from a dark, dull olive (which contains these pigments PG7PO49PB15:4PY150) by Grumbacher to a brighter, medium green (containing pigments PV49P67) made by Maimeri.

Common pigments NOT recommended but still in production include:

*Alizarin Crimson (produced by Daniel Smith using PR [pigment red] 83) will fade.  You could instead use Permanent Alizarin Crimson  (produced by Winsor Newton from PR 206).

*Do not use the fugitive Gamboge Genuine (produced by Winsor Newton from NY24).  Try instead Gamboge Hue (by DaVinci made with PY42PY43).

*Don’t buy Rose Madder Genuine (by Winsor Newton, made with fugitive red pigment NR9).  A better choice is Quinacridone Rose (from Daniel Smith manufactured with PV19).

*Similarly, I would not recommend Dioxazine Purple (produced by M. Graham with PV23).  Mauve (produced by DaVinci from PV19PB29) is a transparent, reliable choice.

Paint color names are often confusing and can be extremely misleading, even in the more reliable paint manufacturing companies.  Many fantastic, silly names can describe the same pigment.  For example, PB60 (Pigment Blue #60) has been recently called Delft Blue, Indanthrene Blue, Indanthrone Blue, Indian Blue, Faience Blue, Old Delft Blue, and Royal Blue by various companies. Same paint pigment, but different names!

Conversely, different pigments (which determine the character and color of a paint) may share the same color title (name).  Magenta can vary from the reliable Schminke Magenta (containing PV 42) to the fading, unsuitable Daler-Rowney Permanent Magenta (with PV23PR122 pigments).  DO NOT rely on color names!

My palette!.jpg

Now, for my recommendations:

*Several companies produce watercolor paints that I prefer.  My favorite brand, Daniel Smith, began in 1976.  This company provides more than 200 pure colors, many of which are single pigment colors and thus ideal for mixing.  Daniel Smith offers pigments that no other company has for sale.  Prices are moderate to high.

*I also like the reasonably priced watercolor paints from DaVinci.  The company was founded in 1975 in California and offers 106 mostly bright, smooth colors.

*M. Graham, begun in the 1990’s, offers 70 well-made watercolors.  The colors are intense, bright, saturated, especially creamy, and easy to mix (perhaps because of the addition of honey along with the more usual gum Arabic and glycerin in their mixtures).  M. Graham paints are more affordable than Daniel Smith or Winsor Newton watercolor paints.

*Winsor Newton began producing watercolors in 1832.  They were the first to publish a complete list of the colors they offered with details of their chemical composition and permanence.  Winsor Newton offers 96 colors that are widely available.  These paints are among the most expensive on the market.  I also find that caps on the paint tube tend to stick if not cleaned carefully before recapping.

*Two other companies offer some good choices of watercolor paints.  Holbein, based in Japan, began in 1900.  They offer 106 colors, which mix easily.  Some fugitive colors are offered; other colors have deceptive or confusing names, or unusual color mixes.  Maimeri, an Italian company, was founded in 1923.  They sell 72 colors at a reasonable price.  Buyers should check light fastness, however, before purchasing their paints.

blog-water jar.jpg

Let’s simplify!  You don’t need to start out painting with a lot of colors.  Perfect starter colors include both warm and cool primaries.  In other words, start with seven colors:

*Cadmium Yellow (warm) and either Azo Yellow or Hansa Yellow Light (cool);

*Cadmium Red (warm) and Quinacridone Red or Permanent Alizarin Crimson (cool);

*Ultramarine Blue (warm) and Phthalo Blue or Winsor Blue (cool);

*And add a convenience earth color like Burnt Sienna, for fun.

You can buy tubes individually; try jerrysartarama.com, dickblick.com, or cheapjoes.com.  On the other hand, if you like, you can purchase Daniel Smith’s excellent Essentials Kit of six 5 ml. tubes.  This kit is available from dickblick.com ($34.76) and amazon.com ($34.74).  Colors included are Hansa Yellow Light, New Gamboge, Quinacridone Rose, Pyrrol Scarlet, Phthalo Blue, and French Ultramarine Blue.

I’d also recommend the DaVinci Scratchmade Eighteen-Color Pan Set available from davincipaints.com ($79.00).

Bibliography:

The Wilcox Guide to the Best Watercolor Paints (2001-2001 Edition) by Michael Wilcox.

Those Troublesome Greens!

Green is one of those colors, along with gray and brown, that create problems for painters, which may be one reason that beginners seek out ready-mixed colors.  After all, color mixing can be confusing and unpredictable.  While the ready-mixed greens sold in tubes are convenient, the colors available for sale are generally NOT the greens found in nature.  And even if you can find some greens that look reasonably convincing, who can afford to buy even a dozen tubes of different convenience greens?

Foliage varies greatly in color and value, with each plant producing its own variation of green.  Color and value also change with distance, weather, time of day, and season.  In reality, the greens of nature show infinite variety.  Therefore, realistic, natural greens require the painter to be able to mix many suitable variations of green from a limited number of paints.  But where do you start?

The color green is made of blue plus yellow plus a small amount of red to tone the color down and naturalize it.  Take every yellow on your palette, and combine each with every blue.  Note that mixing a cool yellow with a COOL blue creates a bright and vibrant green (for example, Hansa Yellow Light with Winsor or Phthalo Blue).  By mixing a WARM and a COOL or two WARM colors, you get a duller, less intense green – because both the warm yellow and blue have some red in their pigment.

green from Ultramarine Blue, Phthalo Blue, Cerulean, Cobalt.jpg

green from Payne's Gray, Manganese Blue, Blue Apatite.jpg

Greens Mixed With Various Combinations of Blue and Yellow.

Another way to create natural greens is to use ready-mixed tube green as a starting point but then to add other pigments to it.  DaVinci Sap Green, for instance, can be the principal ingredient in a whole range of mixtures.

greens from Sap.jpg

green from Viridian, Chrome Oxide Green, Green Gold..jpg

green from Phthalo Green.jpg

Greens Mixed With Pre-mixed Tube Greens.

You can create even more mixtures by changing proportions of each color in the mix.  Catherine Gill in Powerful Watercolor Landscapes (2011) describes a very effective technique for mixing numerous related colors by changing proportions in a mixture.  She makes a “mixing trail” (p. 122), using two colors on her palette.  Instead of mixing two colors together in the beginning, she puts the two colors on her palette, leaving a space between them.  She suggests you take a little of the first color and mix it with the second.  Then, take successive amounts of the second color, and mix with the first until you have several distinct hues.  The space between the two colors is the area where you make the “trail.”  The colors will all be close in value because you haven’t picked up any water.

Catherine Gill also describes a “mixing hub” (p. 123), which is a collection of mixing trails laid like spokes around a central pigment.  The hub allows you to create a variety of related colors.  The hub pigment is in all the mixes of the hub, ensuring color harmony.  And again, since you add no water as you create the mixes, values remain constant.

To simplify mixing greens somewhat, you can think of five basic green mixtures, as suggested by Bruce MacEvoy (on handprint.com).  A BRIGHT green could combine Phthalo Green Yellow Shade (PG 36) and Hansa Yellow (PY 97).  A COOL green could combine Prussian Blue (PB 27) and Phthalo Green Yellow Shade (PG 36).  Combining Prussian Blue (PB 27) and Hansa Yellow (PY 97) produces a LIGHT green.  WARM green comes from combining Phthalo Green Yellow Shade (PY 36) and Burnt Sienna (PBr 7).  Finally, put together a DULL, DARK green with Phthalo Green Yellow Shade (PG 36) and Quinacridone Rose (PV 19).

Five Basic Green Mixtures.jpg

Five Basic Green Mixtures.

With experimentation, you will find many mixtures that work for you.  Make a chart, for handy reference, of your favorite mixtures.

Condensed Chart of Favorite Green Mixes.jpg

Condensed Chart of Favorite Green Mixes.

Finally, the way you apply your pigments to paper can alter the appearance of your greens and foliage.  The first option you have is to mix your color ON THE PALETTE before you apply it to paper.  A second option is to apply separate colors TO YOUR PAPER, allowing them to mingle on your paper.  This technique creates a more varied, dynamic color mix.  Third, you could GLAZE one color over a DRY wash of another color.  Glazing and layering are similar processes.  They both change value.  Glazing uses a very thin, transparent wash of one color over another color.  When warm colors lie below a cool glaze, the resulting color mix is luminous, vibrant, and glowing.  Starting with a cool color and putting the warm color on top gives a heavier, denser glaze.

Finding a variety of natural greens to paint convincing foliage can be confusing and frustrating.  As painters, we know that ready-mixed greens are not sufficient.  Therefore, you should take some time to experiment with all the yellows, blues, and greens on your palette, adding touches of red to some of your mixtures.  Make a chart of your favorite blends for handy reference.  Experiment, and have some fun!

Avoid Painting Lollipop Trees! (Part III.)

Tree color is dependent on several factors.  Never depict trees in your paintings as all the same color – a strong, unvaried green – because you “know” what color trees are.  Tree color varies with the type of tree (species), the season, and the distance from the viewer. You should look for blue/greens, yellow/greens, and red/greens.  Your work will be far more interesting if you include and even exaggerate these variations in color, paying special attention to the cooler, darker hues of the shadowed areas which appear on the side of the tree away from the source of light and on the undersides of the branches.

Spring trees display fresh, bright foliage.  Make the foliage translucent by mixing your colors with plenty of water, and try to keep your shapes well defined.  Leave lots of white paper showing between foliage shapes to suggest sparse, new growth.  Lemon yellow or Hansa yellow light with sap green would work well for creating bright greens and yellows.  Remember to paint foliage in at least two layers (light and dark).  For spring trees in the distance, strive for cooler greens by adding blue to your mixtures; the blue will complement the warm, bright colors of nearer trees.  A good reference for seasonal paint colors is my blog of 11/27/2018, entitled “Spring, Summer, Autumn, and Winter Palettes.”

Summer trees look more solid and richer in color than spring trees.  The foliage is fuller.  Build up the summer tree in two or three layers, starting with the outline of the canopy.  DaVinci Sap Green and Ultramarine Blue work well for summer foliage, with perhaps Payne’s Gray added for the darkest parts.  Remember to leave a gap or two for sky holes.

 

 

Autumn trees have somewhat less foliage than summer trees, and as the season progresses, the trees will, of course, drop more and more leaves, and foliage will become sparse.  Autumn colors are rich and warm:  siennas, reds, and yellows develop, and a few greens linger.  More branches are visible.  In bright sunlight, your autumn tree will appear somewhat paler than you might expect.  Try to mix your colors on the paper, dropping in several colors next to each other and allowing them to blend softly into each other on their own.  Trees are seldom a single color.  A variegated wash of Cadmium Yellow and Light Red with a touch of DaVinci Sap Green could be used to make a range of fall colors.

 

Golden Beech copy.jpg

Conifers have a somewhat different structure and shape than deciduous trees.  To paint conifers convincingly, you must take notice of their structure.  You don’t want to paint Christmas trees!  Conifers develop around a single central trunk.  Look closely to get the angle of the branches correct.  In general, limbs grow up and out.  More specifically, branches at the top of a conifer head upward, those in the midsection go outward, then head upward, and those near the bottom head downward, then upward.  Remember: all the branches are heading for sunlight.  Coniferous branches tend to be shorter and most branch out flatter than deciduous branches.  Try to leave space between many of the branches.

mt.top 8:11 # 69.jpg

White paper birches are tall, thin trees found in the Northeastern United States, growing singly or in clusters.  The trunks tend to be thinner than those of many large trees, with only a few large limbs but many smaller horizontal branches and flexible twigs.  The bark of the birch tree is paper-like and chalky white, sometimes peeling, broken with irregular horizontal textures and dark scars.  Larger branches are white, but the smallest branches appear black.  When you are painting birch trunks, brush strokes, shadows, and bark texture should follow circumferential lines, using blacks and grays (mixed by combining Ultramarine Blue with Burnt Sienna) and a brownish orange (made from Burnt Sienna).

Pheasant in Fog.jpg

You should paint distant trees as simple masses of shapes with minimal detail.  Squint your eyes to observe shapes and groupings of light and dark areas.  The farther away the trees, the paler and less detailed they become.  Distant trees also have a cooler (bluer) color.  As you move from the horizon to the middle ground, you can very gradually warm up your colors by putting more yellow and less water in them.  However, you still need to reserve your richest greens and strong contrasts for foreground trees.

Dynamic skies - summer river 2.jpg

Many of the previously mentioned details about trees may seem obvious or overly simplistic, but a lot of beginning painters do not paint with these many small details in mind.  Attention to such details helps you paint convincingly and accurately.  Details are important!