Let It Snow!!!

Painting snow can be tricky.  Most people think snow is white, but if you look closely, snow is full of color.  Many factors can affect how snow appears, including time of day, temperature, atmosphere, the quality of light, and perspective.  Is the day sunny and bright or overcast?  Is the snow freshly fallen and fluffy or heavy, wet, and dirty?  Do snow shadows appear blue, gray, or purple?

Check out the following hints for painting snow from several experienced artists:

John Pike has painted many amazing watercolors of snow scenes during his lifetime.  He says that the “tendency in painting snow scenes is to make the shadows too blue.”  Pike creates snow that glows subtly with color by pre-wetting the entire white snow area.  While that area is still wet, he drops in small spots of the three primaries (red, yellow, and blue), then softly blends the whole together “to gain a subtle spectral quality” and ”to kill the deadness of pure white paper.”  He creates soft upper edges of snow shadows by “applying clear water in just that area” and painting shadow color “upward to the water.”

Frank LaLumia believes that snow is “like a laboratory for studying light.”  He says, “In my opinion, using only white paper to depict snow is inadequate.  Light is color.” (www.lalumia.com)

Winter is Coming.jpg

Gordon MacKenzie has said that painting a winter scene offers many opportunities to play with color temperature and purity.  The snow is “a mirror for the subtle atmospheres that surround it, from the pure warm and cool colors of a bright sunny day to the dulled subtlety of a snowstorm.”  He describes two techniques to create the snow shadows that define the contours of the land they fall across.  The first method is a quickly laid-down wash wet-on-damp for the first layer and then wet-on-dry for the final layer.  MacKenzie suggests mixing a large enough batch of paint that you will have enough of the same color for both layers.  The second method of painting snow shadows involves painting the entire snow area with a non-staining blue-gray (cobalt blue or ultramarine blue plus burnt sienna).  Once the surface is dry, you can remove bright sun spots by scrubbing them off with lots of water and blotting away the paint.  (www.gordonmackenziewatercolours.com)

VT Red Barns.jpg

Robert O’Brien uses both warm and cool colors when painting snow.  He will wash in a very pale cadmium yellow light where sunlight highlights fall, but for other sunlit areas, he tones down the white of the paper with a very light wash of brilliant orange mixed with quinacridone rose.  For a cooler, more-shaded area, O’Brien uses a light wash of French ultramarine.  He notes that the color of snow shadows will vary based on sky conditions.  On a clear, sunny day, O’Brien likes to use French ultramarine mixed with a small amount of cobalt for snow shadows, sometimes mixed with brilliant orange to tone down the color a bit.  An overcast sky tends to bring about grayer snow and shadows.  Mixing quinacridone violet and new gamboge with blue creates his desired gray.  O’Brien’s snow shadows can have soft or hard edges, or both.  To paint softer shadows, he may rewet an area of snow, let the water soak in, and paint a shadow when the paper is damp but not shiny.  For harder snow shadows, he may wait longer or let the paper dry completely before he tackles a snow shadow.  He also softens hard edges in appropriate place.  (www.robertobrien.com)

Snowy River.jpg

Cecy Turner imagines “key words” that will describe her snow scenes and then tries to use painting techniques to illustrate those ideas.  She likes to use glazing – layers of transparent colors (letting each layer dry before adding another layer) – to “create more interesting colors and nuances.”  The blues that Turner prefers are French ultramarine, cobalt, Antwerp, and cerulean.  She uses a No. 8 Cheap Joe’s Fritch scrubber to soften edges on snow shadows, particularly as the shadows progress farther away from the objects casting the shadows.  (www.cecyturner.com)

Jack Reid uses transparent watercolors to make snow translucent and capture its subtle variations.  He likes to mix a soft gray with cobalt and burnt sienna.  If he wants a pure, luminous, warm gray, he adds more burnt sienna.  He varies this color by adding more cobalt for a cooler gray.  Reid’s palette is permanent alizarin crimson, aureolin yellow, cobalt blue, viridian green, raw sienna, burnt sienna, ultramarine blue, and the staining Antwerp blue and quinacridone yellow.  He prefers to use Winsor-Newton paints except for Holbein viridian.  For painting the illusion of falling snow and the suggestion of trees disappearing in drifting snow, Reid lifts color from the bases of trees with a tissue while the paint is still wet.  He also uses a lot of graded washes on damp paper to create roundness on a mound of snow.  Color lightens and softens (in the graded wash) as it progresses from deep snow shadow up into the light.

Early Thaw.jpg

Debi Watson spatters masking fluid to create the effect of falling snow.  She paints her light values wet on wet, explaining that “most great snow paintings have hints of color in their whites.”  These initial washes are painted with soft, transparent red, yellow, and blue.  Watson moves on to dark areas, then to medium values once the lights and darks have been established.  She states that snow shadows can be kept soft by working on damp paper.  (www.debiwatson.com)

Cathy Johnson paints snow full of color.  If it’s tightly packed in a drift, she says it “may look almost blue; if it’s fluffy and freshly fallen, it can appear blue-gray or lavender.  Old snow on city streets is gray with soot; while in the country, snowy roads may become streaked with brown.  You can achieve either of these street effects by painting wet-into-wet with gray or brown, as appropriate, then adding spatter to suggest splashes.  When the sun is shining on snow, you may see the glitter of light on a billion tiny reflective surfaces.  To recreate this look, try combining all three primaries – red, yellow, and blue – in your underwash.  Wet the paper first with clean water, then drop in pure colors such as cadmium yellow pale, [permanent] alizarin crimson and phthalo blue.  Let the colors mix a bit on the paper – I stir them with the tip of my brush, or by tilting the paper.  These colors shouldn’t be too saturated or they’ll look garish – the goal is to create a light-filled look.  While the initial layer is still wet, add some shadow colors.”  Johnson reserves warmer blues (for example, ultramarine, cobalt, and so on) to suggest the shadow shapes on snow.  “Once the first washes have dried, glaze over them with your blue or lavender snow color” to shape and form the snow.  “To further enhance the prismatic effect of snow, you can also spatter on a bit of each of the three primary colors . . . make sure that your primary spatters aren’t too juicy.  This ensures that the paint spatters remain tiny,” whether into a wet wash or onto dry paper.  (www.cathyjohnson.info)

Fire & Ice.jpg

In his article “A Wintry Mood” (Watercolor Artist, February 2018, p. 82), Geoff Kersey has pointed out that “Just because it’s a snow scene doesn’t mean it has to feel bleak and make the  viewer shiver.” When painting snow, Kersey tries to include bright light and warm color.  He has developed several palettes in various color schemes to alter the feel of an image and suggest different moods.  His COLD PALETTE creates wintry grays and darks.  He mixes a cool gray with phthalo blue and just a touch of burnt umber, a dark brown with ultramarine blue and burnt umber, and a dark green from phthalo blue and burnt umber.  The LIMITED PALETTE includes cobalt blue, neutral tint, burnt sienna, and raw sienna to produce a simple, harmonious feeling.  A WARM PALETTE employs the warm glow of raw sienna and cadmium red, grays mixed from cobalt blue and vermillion, and dark greens made with ultramarine blue, burnt sienna, and viridian.  Kersey echoes the sky colors throughout his thin snowscapes to contrast with the rich winter darks he finds in trees and hedgerows.  He also uses the hard and soft shapes in a landscape to create contrast in his many snowy landscape watercolors.  (www.geoffkersey.co.uk)

Snowy Croft.jpg

Don’t be afraid to use color in a winter snow scene, both warm colors and cool colors.  The light and sky conditions will determine the colors with which you choose to paint.  In snowy conditions skies often require deeper tones than usual in order to make the snow appear lighter by contrast.  On clear, sunny days, snow shadows are bluer to echo the blue sky.  Grayer snow and snow shadows reflect an overcast sky.  As you evaluate your snow scene, look for opportunities to add color and exaggerate color if doing so will improve your painting.  Use snow shadows on the ground to describe the shape of the land under the snow.  Rough ground may need shadow shapes that are bumpy and uneven.  Rocks, twigs, and tufts of grass may stick up through the snow.  Reflected light can be everywhere, sometimes creating glitter and sparkles.  Often snow shadows repeat the sky color, just as a reflection in a body of water can reflect sky colors and the surrounding landscape.

BIBLIOGRAPHY:

Campbell Smith, Ray.  Developing Style in Watercolour (1992).

Kersey, Geoff.  “A Wintry Mood.”  Watercolor Artist (February 2018).

Kersey, Geoff.  Geoff’s Top Tips for Watercolour Artists (2010).

Kersey, Geoff.  Painting Successful Watercolours from Photographs (2015).

Hendershot, Ray.  Texture Techniques for Winnign Watercolors (1999).

MacKenzie, Gordon.  The Watercolorist’s Essential Notebook: Keep Painting! (2017).

MacKenzie, Gordon.  The Watercolorist’s Essential Notebook: Landscapes (2006).

Metzger, Phil.  Watercolor Basics: Perspective Secrets (1999).

O’Brien, Robert J.  “Winter Whiteout.”  Watercolor Artist (February 2015).

Pike, John.  John Pike Paints Watercolors (1978).

Pike, John.  John Pike Watercolor (1973).

Ranson, Ron.  Watercolor Painting from Photographs (1998).

Reid, Jack.  Watercolor Basics: Let’s Get Started (1998).

Reid, Jack.  Watercolor Basics: Painting Snow and Water (2000).

Reid, Jack.  “The Snow Scene.”  Watercolor Magic (Winter 2002).

Ryder, Brian.  Painting Watercolor Landscapes with Confidence (2005).

Strickley, Sarah A.  “A Revolution of Snow.”  Watercolor Artist (February 2010) .

Szabo, Zoltan.  Zoltan Szabo, Artist at Work (1979).

Szabo, Zoltan.  Zoltan Szabo’s 70 Favorite Watercolor Techniques (1995).

Watson, Debi.  “It’s Snow Time.”  Watercolor Artist (December 2010).

Paint Your Shadows Bold… And Transparent !

Light is often the making or breaking of a painting.  Some subjects seem uninteresting or lifeless until bright lights and the consequent shadows become parts of the scene.  Light not only creates interesting shadows for a painting, but it also produces tonal extremes, lights and darks.  Without dark tones and areas of shade, the light parts of a picture will seem bland and not stand out.  Dark tones are needed to emphasize the lighter ones.  In the same way, without light areas, the darker tones have nothing to contrast with.  The issue is not just how much light you put into a painting, but also how DARK you can make your darks! Very dark areas near very light areas will give your painting the greatest amount of contrast and impact.

out cold large.jpg

 

On a sunny day, the main tones are pushed to extremes.  Areas of BRIGHT light will be bleached out to some degree, and thus you will paint them with pale washes.  The brighter the light, the paler the tone, BUT also the more opportunity to offset light colors with dark.  Sunny areas contain warmer colors like yellow, brown, or red, whereas shaded parts of a scene will be grayer and cooler in tone.  At the same time, when painting a brightly lit section of a picture, do NOT think that a thick layer of brightly colored paint will convey the brilliance or glow you are looking for.  If you apply paint thickly, it can appear opaque because the brightness of the white underlying paper has been covered up.  Therefore, add lots of water to your color before applying it.  The more water you have in your mixture, the more the white of the paper will show through to suggest brightness.

cape elizabeth light.jpg

Because the bright spots in a painting will appear even brighter next to dark areas, SHADOWS and shaded areas ought to be a part of any painting.  A lack of light creates the darker tones within an image while also creating shadows and areas of shade.  An object blocking the light casts a shadow which can fall across a lit part of the scene.  SHADE tends to be simply a larger area of shadow.  The darkest tone in a painting is often the deepest area of shade, where the least amount of light reaches.  As light is reduced, color tends to become darker, grayer, and more muted.

acapella pigs.jpg

A shadow across an area of white (for example, snow) will show as a blue, gray, or violet.  However, shadows that are cast across several changes of color (for example, over a field, then a road, then a stone wall) appear to require several CHANGES IN SHADOW COLOR to look realistic.  That is ONE option. To create a shadow color, you could first look at the color as seen in direct light.  In this case, the shadow color must relate to the color it falls across.  If a shadow falls across a green field, its color will be a gray-green.  A shadow cast across a variety of features will change color appropriately, although the shadows MUST remain the same TONE (darkness) throughout (even as the colors change).  Furthermore, shadows cast across a landscape will follow the contours of the land, showing dips and depressions.

If shadows falling across a part of a painting are a darker and cooler version of the base color, how would you paint a cast shadow that crosses a path with grass on both sides (with this method)?  First, you would paint the areas themselves, with the grass painted green and the path perhaps painted a gray-brown.  Paint one area and let it dry before painting the next to avoid blurring.   When the painted grass and path are dry, next create a grayed-green and a grayer gray-brown for shadow colors.  Then paint the shadow in two different stages, one for the grass and the other for the path, with drying in between to avoid bleeding of color.  In theory, the overall TONE of the shadows stays constant throughout, even though the COLORS change according to the features underneath.

Kautzky Oak(154).jpg

Artist Robert J. O’Brien uses a somewhat different (and simpler) technique. Instead, he suggests creating one TRANSPARENT gray shadow color from indanthrone blue, gamboge, and quinacridone rose. Instead of mixing/using multiple shadow color mixtures (as described above), he uses his one transparent gray to glaze over ANY areas that require a shadow. He paints the areas first with their local color, then, when dry, he paints shadows with the ‘shadow gray’. To vary tone and darken certain shadows, he glazes the same gray over previous layers. (Two, or more, layers are darker than one layer!) Since the gray shadow color is transparent, the base color already on the paper continues to show through the layers and remains visible.

So, to create LUMINOUS shadows, you need to be able to see through the shadow to the color beneath. Using a TRANSPARENT paint color is a must!  Your shadows should NOT be thick and opaque.  The most transparent blues are phthalo blue, indanthrone blue, ultramarine blue; the reds are permanent alizarin, quinacidone rose, permanent rose, or quinacridone red; the yellows are  quinacridone gold, gamboge, burnt sienna, or hansa yellow light.  Most blacks and grays straight out of the tube are NOT transparent, so it is advisable to mix your own shadow colors. Mix your shadow color DARKER than you think you need.  Don’t be afraid to paint the shadows dark!

Sometimes color or light can reflect back into a shadow, especially at the shadow’s edge.  REFLECTED LIGHT may require a lighter or warmer section within a shadow.  Reflected light can be very subtle but can create varied color intensity within the shadow itself (for example, warm light suggested by a touch of yellow in the shadow, or a yellow underlayer).  In other words, areas of shade close to brightly lit parts of a painting might absorb more light; the painter could use more color and less gray here to create a bit more color intensity in the shadow.  

In most cases cast shadows have CRISP edges, which you would paint wet-on-dry (wet paint on dry paper) over a dried wash.  As previously mentioned, nearby objects can reflect light or color into the shadows.  A painter could brush in reflected colors while the shadow color is still wet, for SOFT blending. Other shadows may be SOFT-edged (for example, where fleeting light flashes over a hillside, or in some snow depressions).  Paint these soft-edged shadows wet-into-wet.

barn walshaw.jpg

 

The general process for creating a watercolor with enough contrast to make your picture “pop” involves painting in stages and layers.  Your aim is to paint confidently with a brush full of color and to paint shadow areas right up against the lightest parts of your painting.  Think of it this way:

Stage 1 is the initial drawing and any light toning down of the papers,

Stage 2 is painting in the light washes,

Stage 3 is building up the darker colors and shadow areas,

Stage 4 is adding the darkest marks and details, and

Stage 5 is painting the cast shadows.

Remember that your light colors need BOLD DARKS!

Creating Form and Space in a Painting.

How can I create the look of a three-dimensional object or scene on a flat piece of paper? An artist creates form in a picture, in part, through the use of TONAL VALUES: lights and darks will suggest weight and mass in your painting. In other words, contrast and variation of values (lights and darks) will indicate form, space, and depth. SHADOWS appear as SHAPES lying on the surface of an object, following the contours and revealing the form of the underlying object.

LIGHT ON CURVED AND FLAT OBJECTS.

Many of the objects you paint will be a combination of CURVED and FLAT surfaces. Light interacts differently with each of these surfaces, so pay attention to value changes in order to paint a convincing illusion of three-dimensional form.

On a curved surface, darks and lights change constantly and smoothly. When painting a curved object look for a core shadow with reflected light on the dark side as well as a slight shadow on the light side. The change from light to dark on a curved object is GRADUAL across its surface. The direction of the light shining on the curved object determines where different shadows and lights will fall.

In contrast, a viewer can perceive flat surfaces because of a contrast of value between EACH of the surfaces. Each side of a cube, for instance, receives a different proportion of light. Value does NOT stay constant across each surface, but changes slightly as each side recedes.

COLOR VS. BLACK AND WHITE.

Color is made up of both HUE (the name of the pure color) and TONE. Each color (hue) has the quality of lightness or darkness. (Yellow has a lighter tone, for instance, than purple.) Differences in the tone of a color are easy to see when the colors used are not very intense (or strong). However, the brilliance or intensity of colors can interfere with your ability to isolate and focus only on the lightness/darkness of color, thus making it difficult to judge tonal values in a painting. SQUINTING your eyes can help you see the proper tone. As you squint, look only for the difference in lightness or darkness of an area.

A black/white GRAY SCALE (a card with gradations of white, gray, and black) can make it easier to judge tone in your picture. Alternatively, make a black and white copy of your reference photo, or draw a value sketch of your scene including lights, mid-values, and darks for reference while painting. In black and white you will see the tonal values of the subject ( and not the color). This new way of seeing will help you compose, simplify, and adjust values in your painting. With practice, you will be better able to recognize tones and values and to control them.

When you look at your painting subject, look for a range of tones from light to dark. However, keep in mind that TONE in a picture is always RELATIVE. Observe the strength of tone in one area of the picture in relation to all the other tones. When you squint, you will notice that highlights and darks are visible to you while non-essential details tend to blur. Try to simplify your image into at least three (no more than five) tonal values, e.g. light, dark, mid-tone. You can start your painting with pale undertones to establish the layout of your composition. Leave highlights as the white of the paper. Mid-tones are painted next, overlapping some layers to build up color. Dark tones are usually the final layer of building up color in your painting. Having the lighter layers painted, you will find it easier to evaluate just how dark you need to paint your darkest colors.

CONTRAST OF TONE/VALUE.

CONTRAST (the relative difference between light and dark areas in a painting) is one of the ways in which the brain distinguishes one thing from another. The stronger the contrast, the more it attracts attention. Contrast helps a viewer differentiate between subject and background in a painting and directs the viewer’s eye to the center of interest, especially when the center of interest is the point of greatest contrast.

Contrast is dynamic, contributing excitement, attracting attention, and relieving monotony. Contrast creates a tension between the opposing elements, a push and pull, to provide visual strength and make a forceful statement in a painting. (COUNTERCHANGE is the term used for placing light and dark tones next to each other to create impact.) Every artist wants to paint a picture that has some impact! To create a stimulating painting, include strong contrasts.

Contrast in VALUE is the most common form of contrast used by artists. Other possible types of contrast are contrast in temperature, in energy, and in purity of color (bright or muted). While painting, artists try to arrange and modify the values of various parts of a picture, depending on what they want to emphasize. Sometimes they alter values from how those values appear in reality to whatever the artists need to make a stronger composition. If you squint at your painting and certain areas blend into each other, you may need to add more contrast in your work. If you make shadows darker or lose some detail in the bright highlights, you can make your painting more dramatic. If your picture looks dull, with all areas the same tone, you may need to increase the tonal range. Make sure that darker and lighter tones alternate across the painting and that there is tonal variation WITHIN each wash for variety.

Early Morning, Early Spring.jpg

In the above watercolor painting, note the contrasts in tone and color temperature in particular. Are there soft and hard edges? What draws your attention in this picture? What techniques suggest depth and three dimensions?

EDGE VARIATION.

Since VARIATION is important in watercolor, also allow some edges (perhaps in shaded areas and highlights) to merge into areas of similar tone and to be less detailed. (This is called LOST AND FOUND, or HARD AND SOFT EDGES, or fading and disappearing edges, or broken or inferred edges.) When edges appear or disappear or are soft, they create a sense of movement in a painting, allowing the viewers to imagine or interpret what they see. In contrast, hard edges define SHAPES and hold or direct the viewers’ eye. By employing hard and soft edges, the  artist can further refine the creation of distance, depth, and form.

PERSPECTIVE.

Also use PERSPECTIVE ( a succession of spatial planes receding into the distance) to help you create believable space and form. When you place a light-toned object in front of a darker one, it appears to be positioned in front of the other spatially. Larger objects appear closer than smaller ones.

IN SUMMARY.

Tonal counterchange (light against dark) not only appeals to the eye but also creates shape and depth in a painting. Light and shadow across the surface of an object reveal the form of that object. Strong tonal contrast and a varied range of tones create the illusion of space and suggest three-dimensional form.